Discussion
Using FireWire on a Raspberry Pi
Aurornis: Delightful that this still works. It would be interesting to go through the kernel tree and see how much maintenance goes into Firewire related code. Other than pulling data off of old devices, I wonder how many people are out there still using Firewire.
mysteria: I archived all my MiniDV tapes using a cheap firewire card and dvgrab on Linux, it can be set to automatically split noncontinous clips into different files for easy viewing. It's very straightforward to use and can be done unattended.
maccard: Firewire user here! I have an old-but-very-functional rack mixer (Presonus) that will cost £700+ to replace, _plus_ I have to configure and set up the new one. I have a 2007 Macbook Pro that I keep around just for interfacing with it.
geerlingguy: Just thinking back 10 years ago when I was arching all my DV tapes on my Dad's old G5... I did it all by hand through Final Cut Express. It would've been sooo much easier had I known about dvgrab back then!
geerlingguy: There's still a thriving (albeit small) community of skateboarders, retro enthusiasts, and even some AV pros who have FireWire equipment in active use.In the kernel, the last commit in the IEEE 1394 area was a month or so ago—it's not 'active' maintenance, but its definitely being maintained, and is quite stable in my testing. (Thanks a ton to the current maintainer, who's going to go through the 3 year process of sunsetting full kernel support, and coordinating that with external projects!)
MomsAVoxell: Same: a single StudioMix mixer with 2x FP10’s in the racks. This setup is just so lovely and functional I don’t want to upgrade it really, it just plain works. I have an old iMac as the DAW for the job, but the idea of replacing it with an ARM-based system, if it works, is so very appealing…
MomsAVoxell: This is an awesome project.I have a long-in-the-tooth investment in Fireware audio devices (Presonus) in my studio - 19” rack interfaces with 10 I/O’s, as well as the StudioMix mixer with 20 or so .. I’ve been keeping an aging iMac around to use all of this with and it still just plain works, but having the option to replace it with an rPi is really appealing. The system is mostly used for tracking, so having REAPER on the rPi, connected to all that FireWire gear, just seems such a nice idea…I wonder what the load will be like, though? Can the latest rPi with PCI hat and Firwire interface handle 40 channels of audio over FireWire, I wonder? I know the issue would mostly be SD-card write speeds and so on .. maybe this disqualifies the rPi - but certainly there are other ARM-based SBC’s that this same technique could be applied to ..
bsimpson: TIL Linux does eventually drop support for old hardware.
